Wtd 70 series parts

[Fakey]

Im converting my Auto 24v BJ74 to 12v with a 350 v8 with manual gearbox

So heres the list of 70series parts Im after at the moment:

Clutch master cylinder

12v heater

12v wiper motor

12v dash cluster

12v fuel sender

Hopefully there are some nz new 70s or petrol ones being wrecked . Havent had time to look on trademe yet

[Sadam_Husain]

You can have my clutch master cylinder, its not very old I replaced it no so long ago, Sigs putting a bigger one on my truck for the new clutch

[Fakey]

Awesome, cheers Marty thats a good start

[Sadam_Husain]

its probably coming off tomorrow avo so I'll put it aside for you

[mudlva]

theres a bloke in manurewa, south auckland that is able to rewind the old 24 v stuff to 12v about $130 to $160 per motor
i went down the same path a while ago and found the not all the 12v stuff was a straight swap.
had the motors rewound and problems fixed.
he is able to courier them if distance is a problem

[Jerry]

theres a pile of 70 parts sitting at ..... oops

The Cruiser Jnr's are 12v and may fit. most of the interior is the same. might have some stuff

[Fakey]

theres a bloke in manurewa, south auckland that is able to rewind the old 24 v stuff to 12v about $130 to $160 per motor
i went down the same path a while ago and found the not all the 12v stuff was a straight swap.
had the motors rewound and problems fixed.
he is able to courier them if distance is a problem

Hmm could be the go if I get stuck, altho im pretty happy to mod stuff if the need arises. Couriering is no prob I get it pretty cheap thru work. Do you have a name for him?

[mudlva]

hi there i will get the details tomorrow for you

[mudlva]

ok sorry about the delay been a bit busy and all
Co name DC Armature (nz) ltd
Michael Boon
146 Alfriston Rd
Manurewa
Auckland2105
09 267 6013
021 0688 788
dcarmature@orcon.net.nz

there you go all the info that I have
Michael is a cheinse chap english is not to bad passable type of thing, but he knows his stuff about rewinding dc motors etc