80 series handbrake Mods?

[Fakey]

Ive just stripped my 80 series rear diff down to the bare housing (no suspension mounts, brakes, hubs etc) ready to go into my 70 series.
Seeing Ive got it all in bits I thought itd be a good time to look into modifying the brake set up to give me a simpler handbrake as that seems to be the most common complaint about the 80s.

What Im wanting to know is if anyones modified their 80s brakes??
What have you done to them?
Have you changed the whole set up, if so what parts did you use?

Ive got a complete mr2 rear park brake set up in the garage, so I was thinking of trying to make something work out of that?

Other thing is it seems Ive got an 80 diff with the bigger brakes an my farking 15" beadlocks dont fit over the original calipers

[skid]

try the MR2 thing

80 handbrakes in the stupid drums are shit, mine lasted bout 1 month, now its crap again

[Fakey]

try the MR2 thing

80 handbrakes in the stupid drums are shit, mine lasted bout 1 month, now its crap again

Yeah that seems to be a common theme, I need new discs pads seals etc so thought I might aswell try something else

[MNC]

Other thing is it seems Ive got an 80 diff with the bigger brakes an my farking 15" beadlocks dont fit over the original calipers

Wheel spacers dude.

Been there - done that.

The NZ new trucks came out with 15" rims so sounds like you got diff out of an import.

[skid]

Other thing is it seems Ive got an 80 diff with the bigger brakes an my farking 15" beadlocks dont fit over the original calipers

Wheel spacers dude.

Been there - done that.

The NZ new trucks came out with 14" rims so sounds like you got diff out of an import.

WTF you sure you don't mean 16" Matt

14" is something I've never seen on an 80

MrOffroader just put 15s on his 16" clad 80, lots of caliper grinding involved

[MNC]

[WTF you sure you don't mean 16" Matt

14" is something I've never seen on an 80

MrOffroader just put 15s on his 16" clad 80, lots of caliper grinding involved

My bad - meant to type 15" on NZ new trucks.

[Jerry]

Could look at the suburu caliper mod as well

[4WDbits]

Other thing is it seems Ive got an 80 diff with the bigger brakes an my farking 15" beadlocks dont fit over the original calipers

Wheel spacers dude.

Been there - done that.

The NZ new trucks came out with 14" rims so sounds like you got diff out of an import.

WTF you sure you don't mean 16" Matt

14" is something I've never seen on an 80

MrOffroader just put 15s on his 16" clad 80, lots of caliper grinding involved

80 series started coming out with bigger brtakes and 16 inch rims late 92 same time as the 24 valve engine. Configuration depends on the market the vehicle was intended for. In Aus they still had 15 inch rims and 12 valve motor in the 100 series base model. Having an axle from the bigger brake model is a good thing because it also had the strengthened front diff.

[suzolla]

Having an axle from the bigger brake model is a good thing because it also had the strengthened front diff

In what way is the front diff strengthend ??

Cheers
Tim

[Fakey]

Subaru calipers have been done to death, Issues with pad contact on the discs an the fact Ive already got the Mr2 calipers rule that out

Strengthened front diff is somewhat irrelevant to me as Im using a Pootrol front diff.

Could an probably will end up using spacers or grinding the calipers to clear the wheels but thats not really what Im interested in,
Im far more interested in getting a reliable low maintainance handbrake setup. So thats what im interested in hearing about

[Lynx]

from what ive read, the mr2 is the best option, atleast the pads contact the disc, no shitty drum setup, or theres the driveshaft/back of transfer setups.

Cheers Daniel

[Heath]

Can you run them as secondary brakes (on a bracket) so you have the std brakes and then the hand brakes seperate - MR2 ones? Easier to set up fiddles later...

Wouldnt need cert would it? not interferring with OEM system, just not using it.

Dunno legalty.

[Fakey]

Can you run them as secondary brakes (on a bracket) so you have the std brakes and then the hand brakes seperate - MR2 ones? Easier to set up fiddles later...

Wouldnt need cert would it? not interferring with OEM system, just not using it.

Dunno legalty.

Cert?? You havent seen my build thread then this diffs going in my BJ74

Dont want to run two sets of calipers, wont need fiddles with the locker. I was hoping i could make the brake set up slightly smaller so the 15" rims will fit by doing away with the huge factory rear set up

[wopass]

try the MR2 thing

80 handbrakes in the stupid drums are shit, mine lasted bout 1 month, now its crap again

so adjust it you tired prick

if you get them muddy and use the hand brake they wear quickly, so then you adjust it (10min Job) they are wiked again.

[skid]

try the MR2 thing

80 handbrakes in the stupid drums are shit, mine lasted bout 1 month, now its crap again

so adjust it you tired prick

if you get them muddy and use the hand brake they wear quickly, so then you adjust it (10min Job) they are wiked again.

been down that road a thousand times already

have about an inch worth of spacers on lever and now need more

[wopass]

try the MR2 thing

80 handbrakes in the stupid drums are shit, mine lasted bout 1 month, now its crap again

so adjust it you tired prick

if you get them muddy and use the hand brake they wear quickly, so then you adjust it (10min Job) they are wiked again.

been down that road a thousand times already

have about an inch worth of spacers on lever and now need more

spacers on the lever?? what kind of dodgy shit are you doing down there buddy?? your just winding up the bit by the handle in the cab arent you....

[skid]

spacers on the lever?? what kind of dodgy shit are you doing down there buddy?? your just winding up the bit by the handle in the cab arent you....

other dodgy 40 owners with screaming chevys have been let loose at my 80

me thinks a small road trip north for an 80 birthday could be on the cards

[wopass]

me thinks a small road trip north for an 80 birthday could be on the cards

could have done it on the army land trip (if i go) but apparently your not going...

[Lynx]

from memory, when skid reassembled the brakes, he adjusted the brakes at the shoes, but the cable was also stretched so they adjusted it there as you would anyway. But the cable must be very stretched.

Cheers Daniel

[Fakey]

Holy off topic thread batman. Maybe no one has ever modded an 80 handbrake .
Anyway afterspending a few hours lying under the truck last night planning suspension, an everything else ive got to do Ive come up with a plan for the handbrake aswell

[wopass]

Holy off topic thread batman. Maybe no one has ever modded an 80 handbrake .

sorry for going OT but...

maybe because when they are adjusted corectly and looked after they are one of the best handbrake systems available...

theres a reason they dont use calliper opperated parking brakes on a 3 ton bus and that is because they dont hold. what are the calliper opperated parking brakes on? small cars less than half the weight.

dont take this the wrong way, modding shit is cool but there has to be a good reason for it.

[Sadam_Husain]

theres a reason they dont use calliper opperated parking brakes on a 3 ton bus and that is because they dont hold. what are the calliper opperated parking brakes on? small cars less than half the weight.

Good point but shit the handbrake on the subaru callipers on the back of my flatdeck sticks like glue when you pull it on, one of the best handbrakes I've ever had on a vehicle

[Heath]

is it possible to drill holes in these rear brake drums to make them easier to clean out? Someone staretd a thread about this a while ago - wonder what the result was?

[Fakey]

theres a reason they dont use calliper opperated parking brakes on a 3 ton bus and that is because they dont hold. what are the calliper opperated parking brakes on? small cars less than half the weight.

dont take this the wrong way, modding shit is cool but there has to be a good reason for it.

Good point about the weight, This is goin to be a 90/10% bush/street truck. Are you still running the 80 park brake in you 40?
I was also toying with the idea of using a electric line lock for an auxillary parking brake when in the bush, so when its switched on it activates when the park brake is applied, (wired up thru the park brake switch)

[gimmemud]

What about something like this?
http://www.allprooffroad.com/8489brakeupgrades/33

[wopass]

[. Are you still running the 80 park brake in you 40?
I was also toying with the idea of using a electric line lock for an auxillary parking brake when in the bush, so when its switched on it activates when the park brake is applied, (wired up thru the park brake switch)

yes standard 80 park brake,and its awesum. when its clean and adjusted up, you have to remember when they fiill up with mud the shoes wear slightly due to clearance and then they seem out of adjustment all of a sudden, just a clean and a few clicks and its mint again.

i thought about using the line locker for a parking brake as well when i was building but never did.