Split Transfer info/upgrade

[The WEHI]

So thought i would update this post for all the land cruiser owners out there,

Here is some information i found out while doing this to my landcruiser.

Split transfer cases are interchangeable between each other based on the year of manufacture as the only change made was to the idler shaft size
34mm idler shaft was superseded in
1984. by the 38mm idler shaft

And sure there's only 2 Different ratios from factory

1.963
and
2.295

But it's still one step closer to turning those larger tires where it matters

"What ratio do i have?"
(70 Series cruiser Info Click here)
(60 Series cruiser Info Click here)

Cheers jordan



(edited to avoid making more threads)

[Big]

.. ..

[The WEHI]

lol 70's playdoh bud

[The WEHI]

want to know if a 70 series playdoh transfer will fit a 70series landcruiser

[sig]

should do .auto/manual are different but from what i can see they will change depending on the main output gear

[The WEHI]

so what ive found (i think) is that 34mm idler shaft was superceded in
1984. by the 38mm idler shaft so going by that as long as the 70 playdoh has a split case transfer and is after 1984 it should all transfer over giving me a 2.2-1 low ratio vs my current 1.9-1 low ratio and replace the worn out bits lol

any other ideas or corrections that anyone wants to add?

Cheers jordan

[Big]

lol 70's playdoh bud

I didn't realise that the playdoh used the r151 gearbox.. which the split case transfer.. that's why I thought it had a "hilux " type transfer..
As you were..

[The WEHI]

lol 70's playdoh bud

I didn't realise that the playdoh used the r151 gearbox.. which the split case transfer.. that's why I thought it had a "hilux " type transfer..
As you were..

90 series playdohs have "hilux" style tranfer your a series ahead

[kbushnz]

so what ive found (i think) is that 34mm idler shaft was superceded in
1984. by the 38mm idler shaft so going by that as long as the 70 playdoh has a split case transfer and is after 1984 it should all transfer over giving me a 2.2-1 low ratio vs my current 1.9-1 low ratio and replace the worn out bits lol

any other ideas or corrections that anyone wants to add?

Cheers jordan

Yes from my observations and research the two are the same (38mm) later model ones just the low range ratio was different between the two...

[The WEHI]

so what ive found (i think) is that 34mm idler shaft was superceded in
1984. by the 38mm idler shaft so going by that as long as the 70 playdoh has a split case transfer and is after 1984 it should all transfer over giving me a 2.2-1 low ratio vs my current 1.9-1 low ratio and replace the worn out bits lol

any other ideas or corrections that anyone wants to add?

Cheers jordan

Yes from my observations and research the two are the same (38mm) later model ones just the low range ratio was different between the two...

Was hoping you would chime in, was going to pm you as i thought you may have known.

do you know the differances between the manual and auto cases?

[kbushnz]

The basic cases are the same, however the auto has an adapter extension to allow it to mate upto the auto trans.
Here are some links to toyodiy.com based on the KZJ78.

Auto setup...
http://www.toyodiy.com/parts/p_J_199305 ... l?hl=36103
http://www.toyodiy.com/parts/p_J_199305 ... _3503.html

Manual setup
http://www.toyodiy.com/parts/p_J_1994_T ... _3609.html
http://www.toyodiy.com/parts/p_J_1994_T ... _3302.html

Have fun...

[The WEHI]

The basic cases are the same, however the auto has an adapter extension to allow it to mate upto the auto trans.
Here are some links to toyodiy.com based on the KZJ78.

Auto setup...
http://www.toyodiy.com/parts/p_J_199305 ... l?hl=36103
http://www.toyodiy.com/parts/p_J_199305 ... _3503.html

Manual setup
http://www.toyodiy.com/parts/p_J_1994_T ... _3609.html
http://www.toyodiy.com/parts/p_J_1994_T ... _3302.html

Have fun...

Thank you sir didn't think about toyodiy

[The WEHI]

Edited first post with the info i found for others to see