Page 1 of 1
samurai carby
Posted: Sun Sep 14, 2008 6:21 pm
by new2zukes
well took the zuke for a run today very hilly farm and very slippery and the carby started backfireing and would stall if i put my foot to the floor. everyone said there is just crap in the carby so was wondering if it is that hard to take it apart and clean it if its not too easy then il jsut take it to a machanic i have 2 carbys to clean as i replaced the first carby cuz it was dirty and wouldnt idle and had a spare in the shed anyways.some diagrams would be awsome if someone has any if it not hard to clean.cheers
martin
Re: samurai carby
Posted: Sun Sep 14, 2008 10:03 pm
by Heath
viewtopic.php?f=23&t=11705&hilit=+carbSeek and you will find.
This is the red neck fix and it works for dirty carbs but isnt a fix just a get home method. Still need to clean out the fuel line, fuel bowl and filter etc.
The timing belt hasnt slipped has it? Check timing.
Re: samurai carby
Posted: Mon Sep 15, 2008 8:59 am
by UBZ
this web site is your friend
http://www.suzukiinfo.com/You can just spray some CRC carby cleaner through it, or go the whole hog and re-build it.
Re: samurai carby
Posted: Mon Sep 15, 2008 7:01 pm
by QUADRACER
Carb kits approx $60
very easy to install, then add a motorcycle fuel filter form the fuel pump
to carb, vent the top air intake to stop fuel returning and this
will fix the problem,the other thing to check is the idle solinoid, by
removing the wiring and listening for the clicking