27th/28th
27th/28th
nobody kicked it off so.....
.replace bent shock....yeah right cant get a matching one so gotta buy a pair $230 i didnt really have buggar.....rebuild one of the front diffs only to find farken pinion bearing was knacked after putting back on truck so rip it out binned and rebuild nother all good til test drive 3wd with a locker fark.....as it happened i put the manual hubs on rip em off one destroyed oh well put the flanges on .......sorted at last off tiki tour tomorrow will put pics up after....
.replace bent shock....yeah right cant get a matching one so gotta buy a pair $230 i didnt really have buggar.....rebuild one of the front diffs only to find farken pinion bearing was knacked after putting back on truck so rip it out binned and rebuild nother all good til test drive 3wd with a locker fark.....as it happened i put the manual hubs on rip em off one destroyed oh well put the flanges on .......sorted at last off tiki tour tomorrow will put pics up after....
WARNING:
Insanity has replaced reason in the modification of this vehicle
you can follow me, but its gunna hurt
Insanity has replaced reason in the modification of this vehicle
you can follow me, but its gunna hurt
Re: 27th/28th
Prado slowly going back together, got injector pump resealed and then decided to get injectors done (a crowd in Manukau) get them back Monday.
been quite last to weekends but woodhill patrol on the 5th dec
been quite last to weekends but woodhill patrol on the 5th dec
Re: 27th/28th
did you know if you drill a hole in the floor of a Safari ..... green water pours out
spotted a 2 inch section of floor pan/firewall "loose" while under the truck this afternoon, thought bugger it ill just whack a quick rivet in it for now and weld the seam when i strip and replace the front seats. drilled though the floor and then green water came pi$$ing out WTF ..where'd that come from.....
ripped the carpet up to discover the rear heater pipes run smack bang in the center of the driver wheel
well ... what a stooopid place to put them
drill managed to catch the return pipe bang in the middle DOH!
took to pipes off .. jammed a couple of bolts down them to block them off and said
fuckt im' going home and the kids can freeze in the back.

spotted a 2 inch section of floor pan/firewall "loose" while under the truck this afternoon, thought bugger it ill just whack a quick rivet in it for now and weld the seam when i strip and replace the front seats. drilled though the floor and then green water came pi$$ing out WTF ..where'd that come from.....
ripped the carpet up to discover the rear heater pipes run smack bang in the center of the driver wheel
well ... what a stooopid place to put them

drill managed to catch the return pipe bang in the middle DOH!
took to pipes off .. jammed a couple of bolts down them to block them off and said
fuckt im' going home and the kids can freeze in the back.

llıɥ ʇsɐl ʇɐɥʇ ǝʞɐɯ ʇupıp ı sıɥʇ pɐǝɹ uɐɔ noʎ ɟı
-
- Hard Yaka
- Posts: 992
- Joined: Fri Sep 24, 2010 10:38 am
- Location: Beach Haven and kaiwaka
Re: 27th/28th
Not exactly 4wd related, but.... We got our project Mini Clubman going again. A bit rough, but it goes. now All I need to do is get my daily driver Mini going, and warrented. Then get both Lada's going properly and warrented. Just one more exam to go, and I'm free to do what I want, in the big wide world...



tomsoffroad wrote:None of us know what we are doing really. But thats how you get experience.
Re: 27th/28th
Worked on the cruiser (just got home), Engine an trans mounts done roof off to be fibre glassed, many other small things done
Still plenty to do
Paintball tomorrow morning then back onto the cruiser


Paintball tomorrow morning then back onto the cruiser

Didn't barbie drive a jeep??
- suzukisport
- Hard Yaka
- Posts: 439
- Joined: Fri Apr 16, 2010 8:08 pm
- Location: Whangarei
- Contact:
Re: 27th/28th
Went out on saturday and had a bit of a play with a few other mates out Punaruku.




Bent one of the arms coming off the rear of one of the Nissans diffs. Used our ground anchor to straighten it, because the tyre had been pushed into the guard.




Bent one of the arms coming off the rear of one of the Nissans diffs. Used our ground anchor to straighten it, because the tyre had been pushed into the guard.
Comp rig: Suzuki Vitara, L67 Supercharged V6 Commie and auto, Prado chassis and diffs. Gigglepin 8274 twin motor rear mounted winch, air free spools, 35" Silverstones, ect
Re: 27th/28th
Spent Saturday (nearly 6 hours) walking miles around a farm prospecting stages for the upcoming Superwinch Tuff Truck Winch Challenge (Norwest OHV). Found some really good tracks and challenging courses. Then went to Woodhill for a night run and got home just before 1am
Cooked my winch soliniod pack at the "Three Sisters" when I hooked up on a root in a big hole.......Bugger




Ended up leading a group of about 8 trucks around Woodhill in the dark. One guy came to me and said "we'll follow you because you look a bit Tamer than the others"
Just about everybody got panel damage and a Jeep Cherokee blew his rear drive shaft universal joint
Did they not look at all the dents and scratches on my truck
A good night had by all.

Cooked my winch soliniod pack at the "Three Sisters" when I hooked up on a root in a big hole.......Bugger





Ended up leading a group of about 8 trucks around Woodhill in the dark. One guy came to me and said "we'll follow you because you look a bit Tamer than the others"


Just about everybody got panel damage and a Jeep Cherokee blew his rear drive shaft universal joint


Did they not look at all the dents and scratches on my truck

A good night had by all.
I keep looking for the loose nut behind the wheel, but I can't find it!!
-
- Hard Yaka
- Posts: 992
- Joined: Fri Sep 24, 2010 10:38 am
- Location: Beach Haven and kaiwaka
Re: 27th/28th
sibainmud wrote:Spent Saturday (nearly 6 hours) walking miles around a farm prospecting stages for the upcoming Superwinch Tuff Truck Winch Challenge (Norwest OHV). Found some really good tracks and challenging courses. Then went to Woodhill for a night run and got home just before 1am![]()
Cooked my winch soliniod pack at the "Three Sisters" when I hooked up on a root in a big hole.......Bugger![]()
Ended up leading a group of about 8 trucks around Woodhill in the dark. One guy came to me and said "we'll follow you because you look a bit Tamer than the others"![]()
![]()
Just about everybody got panel damage and a Jeep Cherokee blew his rear drive shaft universal joint![]()
![]()
Did they not look at all the dents and scratches on my truck![]()
A good night had by all.
Don't worry, Simon. Soon I'll have the Fiva going, and we can both go places where a lot of the others can't...


tomsoffroad wrote:None of us know what we are doing really. But thats how you get experience.
- curly12
- Hard Yaka
- Posts: 1335
- Joined: Fri Mar 02, 2007 12:00 pm
- Location: Whangarei or there abouts!!
Re: 27th/28th
Finally replaced the top seal in the IP on the pos. Took 1 hour and is a piece of piss to do 

Growing old is compulsory, growing up is optional
Farken homeless..................................
Farken homeless..................................
Re: 27th/28th
Did thompsons track yesterday. From Te Aroha over to Katikati,
Was alot of fun
Before

After


A few in between





Pretty happy with how truck went, gbox a lil noisy now tho hmmm
Was alot of fun

Before

After



A few in between





Pretty happy with how truck went, gbox a lil noisy now tho hmmm

Re: 27th/28th
Club trip up at Rallywoods on Sat, wee bit of carnage ... blown hub on one cruiser, clutch issues on another, V8 Pos went well apart from overheating everywhere
...
Graham tested his brand new tyres
http://www.youtube.com/watch?v=8N8j-KUe1Yc
http://www.youtube.com/watch?v=osqZeLJTvSM
Then Mark had a go
http://www.youtube.com/watch?v=ffONnNegE6k

Graham tested his brand new tyres

http://www.youtube.com/watch?v=8N8j-KUe1Yc
http://www.youtube.com/watch?v=osqZeLJTvSM
Then Mark had a go
http://www.youtube.com/watch?v=ffONnNegE6k
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
-
- Hard Yaka
- Posts: 898
- Joined: Thu Oct 15, 2009 8:44 am
- Location: North Shore, Auckland
- Contact:
Re: 27th/28th
Hungover from xmas party on saturday, so spend all day today (sunday) gettin my car WOF ready. Replaced the lower ball joints today and other little bits and bobs. Getting ready for a weekend of off-roading next weekend! Cant wait!!
2WD 06 Hilux... for now
Re: 27th/28th
picked up gearbox for my terrano finally from taz(cheers for that). Now to ensure it all works sweet.
Re: 27th/28th
Well I managed to wire my spot lights up properly this time. After a few headaches, a bruised leg and a broken grill its all done now. Now just got to get a front bar to mount lights on.
Lubrication Specialist
Lubrication Engineers
www.lubeng.com.au lincoln@lubengnz.co.nz
Lubrication Engineers
www.lubeng.com.au lincoln@lubengnz.co.nz
-
- Hard Yaka
- Posts: 898
- Joined: Thu Oct 15, 2009 8:44 am
- Location: North Shore, Auckland
- Contact:
Re: 27th/28th
lincooln wrote:Now just got to get a front bar to mount lights on.
And a new grill?

2WD 06 Hilux... for now
Re: 27th/28th
there is no point, it does not help the off road performance any. maybe later when I have spare money. But more ventilation is always good anyway. 

Lubrication Specialist
Lubrication Engineers
www.lubeng.com.au lincoln@lubengnz.co.nz
Lubrication Engineers
www.lubeng.com.au lincoln@lubengnz.co.nz
-
- Hard Yaka
- Posts: 898
- Joined: Thu Oct 15, 2009 8:44 am
- Location: North Shore, Auckland
- Contact:
Re: 27th/28th
lincooln wrote:there is no point, it does not help the off road performance any. maybe later when I have spare money. But more ventilation is always good anyway.
haha good point!
2WD 06 Hilux... for now
Re: 27th/28th
wopass wrote:went for a fish
shot bro ,,,,, now thats something i wouldnt mind trying .......
v8 tj...luvs the gas......
Re: 27th/28th
wopass wrote:went for a fish
fletchers??
Re: 27th/28th
J_Dub wrote:wopass wrote:went for a fish
fletchers??
yea that was out the back of square top, briliant weather all weekend with lots of fishing time, unfortunatly the place was plagued with bloody 5-6ft sharks so the snapps and kingys were no where to be seen dammit!!

If you already know everything, DON'T ask bloody questions!!
-
- Hard Yaka
- Posts: 649
- Joined: Fri Mar 05, 2004 12:00 pm
- Location: Whangarei
Re: 27th/28th
yeti wrote:ok , not so keen to try now
My kayak is 13 foot long and I'v had Bronzies as big along side.
Great buzz to paddle along beside them and they are only 3 feet away


"It's a Suzuki thing - you wouldn't understand !"
Re: 27th/28th
Jerry wrote:,
Graham tested his brand new tyres![]()
http://www.youtube.com/watch?v=8N8j-KUe1Yc
http://www.youtube.com/watch?v=osqZeLJTvSM
Then Mark had a go
http://www.youtube.com/watch?v=ffONnNegE6k
what tires does he run now?
i used to Cruise, now i PATROL
-
- Hard Yaka
- Posts: 179
- Joined: Sat Aug 29, 2009 9:43 pm
- Location: christchurch
Re: 27th/28th
went up for a tahr hunt stumbled across a yearling hind for the freezer walkd up the tops saw a few bull tahr and plenty of nannies and kids came across a mob of about 30 tahr amazing weekend cant wait to get out again.



-
- Hard Yaka
- Posts: 898
- Joined: Thu Oct 15, 2009 8:44 am
- Location: North Shore, Auckland
- Contact:
Re: 27th/28th
phraza wrote:Hungover from xmas party on saturday, so spend all day today (sunday) gettin my car WOF ready. Replaced the lower ball joints today and other little bits and bobs. Getting ready for a weekend of off-roading next weekend! Cant wait!!
Annnnd Passed WOF! Yesss!
2WD 06 Hilux... for now