Page 1 of 1
compression on a 80 vx landy.any ideas?
Posted: Mon Oct 10, 2011 8:25 pm
by pressy
hi there guys,
wondered want a compression reading on a 80 series vx diesel should be? and leakdown? what would be a good to ok readings be?
thanks in advance for any help.
pressy
Re: compression on a 80 vx landy.any ideas?
Posted: Mon Oct 10, 2011 8:37 pm
by badnuz
450 and above i think from memory my rebuilt engine was 500....?? something like that with i think 5% variance?
Re: compression on a 80 vx landy.any ideas?
Posted: Mon Oct 10, 2011 8:39 pm
by vvilly
pressy wrote:hi there guys,
wondered want a compression reading on a 80 series vx diesel should be? and leakdown? what would be a good to ok readings be?
thanks in advance for any help.
pressy
whats that i hear ......... are you talking about buying a 4wd
Re: compression on a 80 vx landy.any ideas?
Posted: Mon Oct 10, 2011 8:39 pm
by wjw
Re: compression on a 80 vx landy.any ideas?
Posted: Mon Oct 10, 2011 8:44 pm
by badnuz
struth i was right

Re: compression on a 80 vx landy.any ideas?
Posted: Mon Oct 10, 2011 8:50 pm
by wjw
badnuz wrote:struth i was right


My poor memory is why I have the manuals
Re: compression on a 80 vx landy.any ideas?
Posted: Tue Oct 11, 2011 6:50 am
by red-devil
arr
has tony seen the light

Re: compression on a 80 vx landy.any ideas?
Posted: Tue Oct 11, 2011 5:29 pm
by pressy
Re: compression on a 80 vx landy.any ideas?
Posted: Tue Oct 11, 2011 5:32 pm
by pressy
Re: compression on a 80 vx landy.any ideas?
Posted: Tue Oct 11, 2011 5:33 pm
by mud_slinger
am i missing something here, where is the saf? and why you looking at a toymota?

Re: compression on a 80 vx landy.any ideas?
Posted: Tue Oct 11, 2011 5:33 pm
by Jerry
What happened to your nissan thingy

and welcome to the toyota side

Re: compression on a 80 vx landy.any ideas?
Posted: Tue Oct 11, 2011 5:34 pm
by pressy
wjw wrote:1hdt compression.PNG
cheers for the help guys esp you bill.
pressy
Re: compression on a 80 vx landy.any ideas?
Posted: Tue Oct 11, 2011 5:36 pm
by pressy
Re: compression on a 80 vx landy.any ideas?
Posted: Tue Oct 11, 2011 5:40 pm
by pressy
Re: compression on a 80 vx landy.any ideas?
Posted: Tue Oct 11, 2011 5:44 pm
by Jerry
Re: compression on a 80 vx landy.any ideas?
Posted: Tue Oct 11, 2011 5:52 pm
by pressy