Offroad-Express

Hi

I have been trying to find a noise in the front end of my truck. I unbolted the rear of one arm and found that I could move the arm up and down with a definite noise there.
I then took out all 3 bolts and found the rear of the two bolts into the diff is worn.
Has any one had this problem?
Where would I get these?
Are the front 2 bushes the same size as the rear bushes?

Thanks Henry

Henry wrote:Hi

I have been trying to find a noise in the front end of my truck. I unbolted the rear of one arm and found that I could move the arm up and down with a definite noise there.
I then took out all 3 bolts and found the rear of the two bolts into the diff is worn.
Has any one had this problem?
Where would I get these?
Are the front 2 bushes the same size as the rear bushes?

Thanks Henry

Yup radius arm bushes failing are common.
PM suzolla he sells factory bushes... Don't get aftermarket.. they flog out quickly.

From memory they are the same...

Hi Henry,

See http://www.offroadexpress.co.nz/Forums/viewtopic.php?f=67&t=33808

Cheers
Tim