Page 1 of 1
Mitsubishi front click
Posted: Wed Nov 06, 2013 9:29 pm
by aceospadez
Hey people's
Have a small problem with my pajero v6 swb went 4wdin tonight and sometime there would be a loud click from front almost sounded like diff wind up or cv was drivin in straight line any clues thanks
Re: Mitsubishi front click
Posted: Wed Nov 06, 2013 10:39 pm
by fish
i have a click when turning hard on the left front of my mitzi, it sounds to me like the steering arm or some thing.
Re: Mitsubishi front click
Posted: Thu Nov 07, 2013 5:24 am
by pressy
Both of these sound like cv's on the way out to me, my vx made the same noise turning then it broke. the first comment is it in a straight line noise or turning also?
Re: Mitsubishi front click
Posted: Thu Nov 07, 2013 5:54 am
by aceospadez
In a straight line
Re: Mitsubishi front click
Posted: Thu Nov 07, 2013 8:20 pm
by Camshaft
Mine was doing that. Turned out to be a broken roller bearing on the inside of the hub. Have to take the hub right off to get to it.
Re: Mitsubishi front click
Posted: Sun Nov 10, 2013 5:40 pm
by diogenese
I'd agree with front wheel bearings as I have has two go now.
Water seems to be able to get up the inside along the CV shaft and through the free wheel hub into the bearings.
Re: Mitsubishi front click
Posted: Sun Nov 10, 2013 5:55 pm
by slide
Front diff outer axle bearings are prone to fail.
Also if tyres are different (brand, size, wear or pressure) drive can bind up in a straight line, possibly causing cv noise on a sick cv joint.
cheers
Re: Mitsubishi front click
Posted: Tue Dec 17, 2013 7:35 pm
by aceospadez
Found out the rear diff had melted all the spider gears in lsd
Re: Mitsubishi front click
Posted: Tue Dec 17, 2013 9:07 pm
by fish
Re: Mitsubishi front click
Posted: Tue Feb 04, 2014 7:29 pm
by aceospadez
Just when I thought it was safe now have loud banging sound drivers front under load I think I have killed the cv or blown a lockin hub balls
