Cheap Winchs 9500lbs $400 made in china

Jerry · Post by **Jerry** » Wed Oct 03, 2007 4:46 pm

out of interest are any winches etc made in Taiwan or Korea.....some of the stuff there is getting pretty good ??? perhaps Hyundai heavy industries etc makes them?

basics · Post by **basics** » Wed Oct 03, 2007 5:56 pm

my 9500lb winch is from china and ive never had a problem ( although the solinoids have just gone, after a year and a bit of drowning,getting it caked in mud and putting hugh strain on it most times i went out)

so for under 400 bucks its worth the risk.

mark and graham, i too think your doing a great job, thanks heaps.
also stinky, your help is not going unnoticed

guppy · Post by **guppy** » Wed Oct 03, 2007 6:06 pm

yes to mark and graham tax.......cheers guys

Swaney · Post by **Swaney** » Wed Oct 03, 2007 6:26 pm

yeah i would happily pay a bit extra for the guys that sorted it

Smurf · Post by **Smurf** » Wed Oct 03, 2007 7:30 pm

I'd pay a mark and graham tax, its a great job they are doing

nibbla · Post by **nibbla** » Wed Oct 03, 2007 7:47 pm

im for the tax

rowinz · Post by **rowinz** » Wed Oct 03, 2007 7:48 pm

I too think the M&G tax is fully justified and am happy to pay.
Also I could do the Picton - Chch run with work ute if that suits.
CheersR

Beer_Cruiser · Post by **Beer_Cruiser** » Wed Oct 03, 2007 9:02 pm

I'm happy to pay m&g tax

mylux · Post by **mylux** » Wed Oct 03, 2007 9:08 pm

Hi,is it too late ? If not chuck me down for a 12000lb 12 volt Thanks and i'll pay the tax as well.Richard
email is postmanfencing@free.net.nz

turoa · Post by **turoa** » Wed Oct 03, 2007 9:13 pm

im happy to pay any tax as long as I get a winch

CHCHilux · Post by **CHCHilux** » Wed Oct 03, 2007 10:27 pm

hey hoping its not too late to be put down for a winch!

ew12000pound with wire

jimmyrattray@gmail.com

and im all for the tax!

albundy · Post by **albundy** » Thu Oct 04, 2007 6:22 am

You talk about waterproof , Warn winches are not,

Mine works just fine under a foot of water. In the south island, winches are always under water and my warn pulls big loads all the time, even under water.
Al

minefield · Post by **minefield** » Thu Oct 04, 2007 8:36 pm

It Closes to night,

I think I have spent every night for the last week on the computer pleased to have a break.

We have 24 on the list, Not having much luck with the sythetic rope, My man in China said that the sythetic rope made in China as yet is not a good quailty but I am on a site in Japan and am waiting for a reply

I will be sending the order off on Friday I should get a reply mid next week,, Keep you informed

Graham

nstacey · Post by **nstacey** » Thu Oct 04, 2007 8:47 pm

Minefield, when is payment going to be due once the order is made?
Cheers
Nick

minefield · Post by **minefield** » Thu Oct 04, 2007 8:58 pm

I will get possible mid to late next a total price if I agree on the price I will email everyone for payment that will possible late next week could even later, I then have to pay 30% on invoice and the ballance on siting of the loading docket, Remember I have winches with and with out wire rope all this will take time to assemble they are like any big parts supplyer they dont carry a lot of winches in stock they will have to be ordered to how we want them.
I dont think we have any problems

Graham

Big-AL · Post by **Big-AL** » Thu Oct 04, 2007 9:54 pm

1 more if its not too late 9500lbs

Big-AL · Post by **Big-AL** » Thu Oct 04, 2007 9:56 pm

if you are even getting 9500, otherwise a 12000 is fine

Big-AL · Post by **Big-AL** » Thu Oct 04, 2007 10:09 pm

taranakisurfer@hotmail.com

icekayak · Post by **icekayak** » Thu Oct 04, 2007 10:16 pm

have pm order through

happy to pay the tax on these also...

minefield · Post by **minefield** » Sat Oct 06, 2007 8:02 pm

Hi All,

We have been offered a very special promotional offer by Runva The largest winch manufacture in china.
"This has nothing to do with the runva dealer in Auckland"

I think this came about by the order I was complying, I think some how the word got out, As Runva is trying to estabilish it self a name in NZ in order for us to buy of them they have come up with a very special promotional "ONE OFF DEAL"There very latest EWX 12000lbs with cordless remote $ 550 NZ this has a 7.5 hp motor and 206.1 gear ratio that means very powerful and very fast they also the 10000lbs for $525 with a cordless remote and there is a 8000lbs model and with a 12 months warranty and parts avalible in Auckland.

Mark also agrees with me its too good to pass up and with no import problems

I emailed 12 at random off the list and all but one said go with Runva
So Runva it is !!!

I will be supplying Runva warehouse with the list of names and any others that with to come aboard as now the time is extended until tuesday as he wants the list asap, He also said he may have order more stock in to meet the order.

this has come from a simple thread and beceause of that hopefully we all will get a cheap winch

cheers

Graham

gbradfield@gmail.com

Name , address, Winch type and voltage

Dace · Post by **Dace** » Sat Oct 06, 2007 9:19 pm

mike wrote:Think I'll wait and see now how this order turns out and how many/if any of the winches have defects as I've sen a lot of product come in from china and fail because of bad quality from the last place i used to work.

If it all turns out ok I'm wondering how much interest there would be for another order later on?

Mike

I hate, and i mean really hate missing out on a good thing, but i really need some decent tyres and a lift kit before a winch

I would really be keen on coming in on a 2nd order next year if these turn out to be mint

stinky · Post by **stinky** » Sat Oct 06, 2007 9:48 pm

Hi im not being picky or anything but are these runva winches waterproof and from the info i can find only the 24volt one has the 7.5 hp motor. Im not entirly sure that the convenince of a nz supplyer is worth an extra $200 to me.

icekayak · Post by **icekayak** » Sat Oct 06, 2007 11:32 pm

how much are the 8000 and 6000lb winches?

minefield · Post by **minefield** » Sun Oct 07, 2007 2:01 pm

Any one know , Thomas Quinn, he has his name down for a winch I have lost his email address

Thanks

Graham

1bad4x · Post by **1bad4x** » Sun Oct 07, 2007 4:39 pm

stinky wrote:Hi im not being picky or anything but are these runva winches waterproof and from the info i can find only the 24volt one has the 7.5 hp motor. Im not entirly sure that the convenince of a nz supplyer is worth an extra $200 to me.

I dont wanna sound like a sale's rep. But

Dude just the safety factor of a NZ distributor is worth the extra loot (sold Me) let alone the fact he is wanting to supply (at close to if not cost) 20-30 winches to bunch of 4x4 fanatics who will use & abuse them

Let alone the ease of no importing. no dealing across country's It's just sooooo much better & worth every cent

I have orderd the 10'000lb one

& from what i have seen & read the runva is the better..

tgaguy1 · Post by **tgaguy1** » Sun Oct 07, 2007 7:33 pm

Graham, have you got a link for the EWX 12000lbs winch so i can check out the specs. I can't find it on the runva or runva nz sites.

Cheers

minefield · Post by **minefield** » Sun Oct 07, 2007 7:39 pm

It's latest model it may take time to be included

graham

northland_pajero · Post by **northland_pajero** » Mon Oct 08, 2007 5:41 am

I brought one of the guy who sells them on trademe, there was a problem with the solinoids, he posted a new controller before he received the faulty part back. The advantage with using a local guy is in the back up service and replacement parts.

The winch had its first workout on the weekend, was pulling like a schoolboy, I think I neew more agressive tyres

[/url]

timotheus · Post by **timotheus** » Mon Oct 08, 2007 9:50 am

Graham, your a champ.
I cant afford one but everyone who can owes you a lot of beer.

MNC · Post by **MNC** » Mon Oct 08, 2007 8:51 pm

minefield wrote:...I will be supplying Runva warehouse with the list of names and any others that with to come aboard as now the time is extended until tuesday as he wants the list asap, He also said he may have order more stock in to meet the order.

Hi Graham, I haven't heard from this guy. Is he going to email us all individually? Or are we supposed to be contacting him to confirm we still want to proceed with winch purchase order confirmed to you previously?

Cheap Winchs 9500lbs $400 made in china

Will you definitly buy a winch?

winch

winchs