88 Gen 1 LWB Paj Did they come out with rear Discs factory ?

For all Mitsubisih related topics

Post Reply
User avatar
meece4x4
Hard Yaka
Posts: 513
Joined: Sun May 27, 2007 12:00 pm
Location: Ohangi, Taranaki

88 Gen 1 LWB Paj Did they come out with rear Discs factory ?

Post by meece4x4 »

I just struck a little problem ... my rear pads are making that horrible screeching sound that they make when the wear indicators start rubbing. no probs i thought i'll just nip into Ripco and grab a new set of pads for the Mrs to fit.

Okkkkaaaayyy small problem, neither Ripco or superuseless has a part number listed for rear disc pads for the 88 Gen 1 LWB Leaf sprung Pajero, I'm assuming that the rear leaf sprung diff has been replaced at some stage (it's got a really effective LSD) or the Gen 1 DID have rear Disc's and Ripco and superuseless need to update their databases :lol: anybody got any ideas if the later coil sprung rear disc pads fit?? i know could just whip out the disc and take them in and match them i suppose but i'm interested in trying to find out what the diff actually came out of

the Vin plate rear Axle numbers must mean something to someone but they are just a bunch of Number to me, from what i can find the 1987-88 GLX had rear discs but they where Coil sprung not leaf :oops: .
llıɥ ʇsɐl ʇɐɥʇ ǝʞɐɯ ʇupıp ı sıɥʇ pɐǝɹ uɐɔ noʎ ɟı
User avatar
Pajmad6034
Stropper
Posts: 3
Joined: Mon Feb 09, 2009 6:35 pm

Re: 88 Gen 1 LWB Paj Did they come out with rear Discs factory ?

Post by Pajmad6034 »

the leafers did come out factory disc but the pads are listed under montero and Rip Every Poor C@#% Off probably wont have that listing, you can get them for the coil and they will fit if your handbrake is inside the disc, if its through the caliper handbrake they are the same shape they just have a wee locator near the top back center of the pad to stop the piston turning, FYI dont forget to wind the piston in if its handbrake tru the caliper, dont force it with a clamp.
1991 v44lwb Paj...4d55 2.3 23psi boost ALRIGHT, T-max 10000, rto1 33", ball joint flip, 6"lift in rear, 45mm bodylift Custom winchbar and obstical shifter(bumper) rear locker, modified turbo, 3"exhaust
Post Reply

Return to “Mitsubishi”