Assortment of Toyota stuff not required after cruiser build

[darylpnnz]

I have just finished converting my 70 series MWB cruiser from 3B to 14B (with an intercooled turbo added for the extra fun factor). So I have a few extra parts not required that may be of use to someone.

I have a 3B with 180k on it in good condition - missing alternator, starter motor, thermostat housing and fuel solenoid. Most other stuff there I think including P/S pump. I might have pinched a few other bits and pieces off it to convert the 14B. Will have another look at it and let any interested parties know.

I have a vacuum pump from a 3B alternator in good condition. Wasn't required as the 14B has an engine driven pump.

I also have a 12V starter motor in 'as new' condition that came on my 14b. It looks as though it would fit the cruiser but was for an auto Dyna.

I have a 12v fuel solenoid.

Also have a generic 12v alternator in good condition.

I have a 14B DYNA auto that has a Range Rover transfercase adaptor plate attached. The 14B was in a Range Rover before I got it and I am told the auto was recently rebuilt!!! The auto is complete and even includes the flexplate.

The 14B had a remote mounting spin on fuel filter that wasn't required and could be of use to someone.

I have a 4G63 L200 viscous fan (same fan diameter and bolt pattern as the yota water pump but a shorter shaft)

14B engine mounts.

BJ73 front swaybar.