Suzuki LJ / SJ - Vented Distributor Caps

[UBZ]

Thought I would share for all owners of Suzuki F & G Series Engines .
ie F8 / F10 / G13 - Maybe G16

I have found a local supplier for the LJ80 F8a vented distributor caps here in NZ
These caps will work on above listed engines and allow the Dissy cap to be plumbed to Vacuum (Moisture Removal) or for Positive air pressure (Deep Water Crossing) with out cutting holes / mounting fittings etc to the cap.



http://butlerautomart.co.nz/our-range/Ignition/Distributor-caps/Product-Specification-XD220.aspx

I long thought these were out of production.

[Chops4wd]

Mint, thanks for posting, going to purchase one for my lj80

[PuddleJumper]

Mint, thanks for posting, going to purchase one for my lj80

Any pics of the 80?

[Chops4wd]

Haha at the moment there isn't much to take photos of, its currently stripped down to chassis, waiting for me to finish a couple of other projects before I can start putting it all back together. Best thing about it is reg on hold so will be hopefully road legal once again before the year ends Will put photos up once things start happening again.