egr butterfly

[Waddles]

ok lads another dumb ass egr q i know ha since i have been able to park my safari up 4 a bit i decided to finally get around to removing the egr.
after a few bad words i have got it all off and now cleaning all the shiet out of the manifold i have removed the butterfly as well but need to know what you boys have used to block the pivot holes were the fly was got me a bit stumped

[Crash bandicoot]

ok lads another dumb ass egr q i know ha since i have been able to park my safari up 4 a bit i decided to finally get around to removing the egr.
after a few bad words i have got it all off and now cleaning all the shiet out of the manifold i have removed the butterfly as well but need to know what you boys have used to block the pivot holes were the fly was got me a bit stumped

tap and die set with some bolts and loctite.

[Mattman]

X2

[Waddles]

sweet i did think that but with a nut and bolt wasn't sure if it was trust worthy ha thanks!
apart from the vac lines (i have already blocked) is there any electrical plugs or sensors i need to be aware of? i herd there a water temp sensor for it on the nissans is it the front 1?

[Mattman]

You will struggle to get a perfect seal with a but and bolt. Make sure you use plenty of thread locker if you go that route.

Matt.

[Waddles]

year il get it tapped

[Bonus]

I used Selleys Knead it, worked a treat been sweet now for over a year

[Waddles]

shellys kneed it that stuff is amazing it does work a treat cheers