what toyota box could i use that will handle a v8 plus give me a pto shaft for a winch, i want to start getting some bits together to build a new bush truck, i will keep my paj cause it is good for the kids with windows and heater etc, but want some thing much better that can run big tyres , pto winch and sound proper, being able to lower the gears also would be good as have just scored some 38.5 ground hawgs, would prefer manual but auto would do , will be off road only, any ideas would be good , cheers
vaughan
what box to use
Re: what box to use
You probably want to be looking at prado or cruiser boxes, an R series for manual or A343 for auto. You can increase the number of clutch packs in the a343 to make it stronger. You will need to get a cruiser/prado transfercase with the pto plate on it. It should be bolted on, on the passenger side. You will also need the PTO gear itself, which I hear are rare as hens teeth, so I would suggest you source that first.
-----------------------
Who knew Prados could fly?
Who knew Prados could fly?
Re: what box to use
Cruiser
'85 Hilux crawler, 3rz, duals, 4.7's, 4.88's, ARB's, 30 spline Longfields, 6 stud SNR4x4 Histeer, Airshocks up front, coiled rear, 40" Iroks.
^^^this shite is all about to change....^^^
021 273 9942
jafa@inspire.net.nz
^^^this shite is all about to change....^^^
021 273 9942
jafa@inspire.net.nz